repair shop

Contact Information

auto shop repair

North Davidson Automotive

7047 Old US Hwy 52

Welcome, NC 27374

Phone: 336.731.3150

Email Us

Now Hiring

Feel free to call or email us to schedule your next appointment.


Business Hours

Monday - Friday
7:30 AM - 6:00 PM

Saturday
Closed

Sunday
Closed

COMPUTER DIAGNOSTICS

HERE’S HOW YOUR MODERN VEHICLE’S CONTROL COMPUTER OPERATES:

A network of sensors and switches convert and monitor engine operating conditions into electrical signals. The computer receives this information. Based on information and instructions coded within this savvy computer program, commands are sent to three different systems: ignition, fuel, and emission control. Whenever a problem arises (as seen by that nagging “check engine” or “service engine soon” light), our certified techician will check whatever command is prompted, in addition to the status of your engine control computer and sensors. That way you’ll know if your vehicle’s performance is caused by a real problem, or just a sensor/computer issue.

COMMON QUESTIONS:
WHAT IS THE CHECK ENGINE/SERVICE ENGINE SOON LIGHT?
The check engine/service engine soon light notifies the driver of a possible emissions related problem. It is also known as a Malfunction Indicator Lamp (MIL).

The MIL can be either a steady or blinking light. A steady light indicates a fault that may cause high engine or evaporative emissions. Under certain conditions the light will blink or flash. A blinking light indicates a severe level of engine misfire that can cause expensive component damage.

WHY DO WE NEED A MIL?
The MIL is part of the on-board diagnostic (OBD) system required by EPA regulations on light-duty vehicles and light-duty trucks to monitor the vehicle’s emission related components. The MIL alerts the driver of a potential problem; IT IS AN EARLY WARNING SYSTEM.

WHAT IS OBD?
OBD was designed to monitor on-board computers which control many of the engine’s systems, such as fuel and ignition. OBD systems were first developed in the early 1980’s as cars became more computerized. The system is made up of sensors and actuators and diagnostic software.

OBDII is a complex computer package installed on 1996 and newer cars and light trucks that predicts emissions and notifies the driver if there is a problem by turning on the MIL. OBDII is a self diagnostic system where fault codes indicate which components of the system may be malfunctioning by storing the codes in the computer. These stored codes are read by the auto technicians’ scanning tools.

WHAT DOES OBDII DO FOR ME?
One of the benefits of the OBDII system is the possible reduction or prevention of harmful emissions and therefore improved air quality. The system is designed to alert drivers when something is wrong that may affect emissions. Early diagnosis and repair may also prevent more costly repairs on both the emission control systems and other vehicle systems and may possibly add fuel economy benefits. OBDII systems provide technicians with more information for diagnosis then ever before.

WHAT SHOULD I DO IF THE MIL COMES ON?
The light informs the driver of a potential problem and a need for service. This does not indicate the need to stop the vehicle immediately. The driver should consult their vehicle owner’s manual and/or a repair shop as soon as possible. A blinking light indicates a more severe problem; you should reduce speed and/or load and seek service as soon as possible.

HOW IS THE MIL TURNED OFF?
There are several ways to turn off the MIL: (1) check to see if the gas cap is tight; if not, tighten it (the MIL may not go off immediately) – a loose cap may indicate an evaporative fuel leak; (2) have an auto technician check the system with a scan tool, perform a repair and turn off the light; or, (3) the system may turn itself off after a period of time if it no longer detects a problem.

WHY AM I CHARGED FOR DIAGNOSTIC TIME ON A SYSTEM THAT DIAGNOSES ITSELF?
OBDII only provides a “hint” or a “clue” of the problem. Diagnosis time will generally be needed to isolate the true cause of your vehicle’s problem and identify the proper repair. There will be a charge for this labor.

WHAT IF THE TECHNICIAN HASN’T BEEN ABLE TO FIX THE PROBLEM AFTER SEVERAL ATTEMPTS?
There may be other problems not readily detectable. For example, the light may come on due to a software problem when there is no problem with the sensor component. This is an unusual situation, but it is still important to have the software problem fixed so OBDII can function properly and detect potential problems with the car.

It is important to communicate with your repair shop and let them know there is still a problem. Following a test drive and review of the current data in the vehicle computer, the technician is confident that your problem has been fixed. However, due to the complexity of the vehicle monitoring software, several drive cycles are necessary to verify all problems have been cleared. Therefore, the customer must be the final quality control inspector and report any problems to their repair shop.

DO I NEED TO GO TO A REPAIR SHOP IF THE LIGHT WAS ON AND THEN WENT OFF?
The MIL may indicate a temporary problem that may only happen once. However, if the MIL goes on again, you should go to the repair shop.
AN ILLUMINATED MIL SHOULD NEVER BE IGNORED.

Contact Information

brake repair

North Davidson Automotive

7047 Old US Hwy 52

Welcome, NC 27374

Phone: 336.731.3150

Email Us

Now Hiring

Feel free to call or email us to schedule your next appointment.


Business Hours

Monday - Friday
7:30 AM - 6:00 PM

Saturday
Closed

Sunday
Closed

  • tune up
  • tune ups